Combi-Cam 7850 Black Metal Drawer Cabinet Lock Dial Combination 5/8" 7/8" 1-1/8"

Description

Combi-Cam 7850-BLK Black Metal Drawer Cabinet Lock Dial Combination 5/8" 7/8" 1-1/8"
The Combi-Cam is a secure, solid metal cam lock with up to 10,000 possible combinations. The combination is easy to change with no expensive rekeying kits required.
The Original
Combi-Cam was the FIRST of dial combination cam locks on the market with a proven history of reliability
Secure
The solid metal lock offers security with 1,000 possible combinations and resistant dials.
Specifications
Measurements
Item #
Cylinder Length
Fits Material Thickness
Finish
Pack
7850S
5/8"
3/8"
Chrome or Black
20
Cabinet Lock
7850M
7/8"
5/8"
Chrome or Black
20
Cabinets Lock
7850L
1-1/8"
7/8"
Chrome or Black
20
Cabinet Drawer Lock
7850XL
1-3/8"
1-1/8"
Chrome only
20
Cabinet Drawer Lock
7803
5/8"
3/8"
Chrome and black
20
Features
Choose a combination that is easy for you to remember. You can be assured that your number is secure with over 1,000 combinations possible
Durable All-metal Construction
The Combi-Cam is the best quality combination cabinet lock with all solid Die-cast zinc components
Easy to Use
The Combi-Cam is very easy to use. Simply give another person the 3 digit number to open the cam. The 3 dial access is a big improvement over the "gym locker" Dial System because it is more secure and does not require confusing sequential steps. With the Combi-Cam, if you are off one number, simply correct that number... NO NEED TO START OVER AGAIN (which is VERY frustrating!):
The Old Gym Locker Dial System- 12 right, 8 left, 17 right. If your finger slips or you don't dial it just right START OVER.
The Combi-Cam combination cabinet locks system - OPENS UP THE FIRST TIME, EVERY TIME.
Easy to Recombinate
The Combination Cabinet Lock is the easiest Cam Lock to recombinate and only takes seconds. You do not need any special tools or a mechanical degree to open the Combi-Cam. Simply follow the below easy, quick instructions:
Have the Combi-Cam set on the combination that opens the Cam
Using a paper clip, push the set screw in while setting to the new combination
Release change button after desired number is dialed in
And that is all!
Durability / Reliability
Well established with years of proven durability and reliability.
Convenient
To change the combination, simply have it on the opening combination, depress the change pin, and change to the new combination. It’s that simple!
Installing
Wood Application
Step 1.
The Combi-Cam replaces a standard keyed 3/4 diameter cylinder. For new applications, drill a 3/4" hole.
Insert the cylinder body through the front.
Note: Be sure the set pin hole is at the bottom (red arrow) .
Mailbox Lock
Back View of installation and cylinder.
Mailbox Locks
Step 2.
Place the pronged washer for wood applications.
Tighten the 3/4" cylinder nut securely.
The pronged washer will grip the wood.
In addition, you have the option of installing small screws in the holes provided in the pronged washer.
Mail Box Locks
Step 3.
Insert dial face module through the front of the cylinder.
NOTE: Make sure the black rubber ring goes around the shaft as is inserted through the hole.
Mail Box Lock
Step 4.
The Combi-Cam replaces a standard keyed 3/4 diameter cylinder. For new applications, drill a 3/4" hole.
Insert the cylinder body through the front.
Note: Be sure the set pin hole is at the bottom (red arrow)
Mail Box Lock
NOTE:
Also make sure the reset button on the dial face is at the bottom (red arrow).
Mailbox Locks
Mail Box Locks
Step 5. Stop-Cam Placement
Position 1. For the cam to rotate to the right as you face the front of the lock.
Position 2. For the cam to rotate to the left as you face the front of the lock.
1.
2.
Step 6.
Scramble the dials to lock the Combi-Cam.
Mail Box Lock
Metal Application
Wood Installation instructions with the exception of the following steps.
Step 1.
Installation will either be replacing or the metal will be punched.
Please note the punch template to the left (comes with product instructions).
Step 2.
Wood Prong Washer not required.
Resetting
You can set a new combination for your Combi-Cam any time and it is very easy to do.
Step 1. Set the combination to the number that opens the cabinet locks. Factory default is 0-0-0.
Step 2. Push the change button in (located on bottom of the cabinets locks) with a paperclip while setting a new combination.
Step 3. Release pressure on the change button by removing paper clip. It is that easy to set the Combi-Cam cabinet locks! Change your combination any time and as often as you want.